A doorbell mounting wedge is a small angled plate that screws between your video doorbell and the wall, tilting the camera down, sideways, or around a corner so it captures the walkway instead of a blank wall. If your porch has lap siding, a canted wall, a recessed entry, or a side wall beside the door, you are the person who needs one.
Most of the difficulty with angled porches is not the camera. It is geometry. A doorbell mounted flat on an angled surface points its lens at the siding reveal, the porch ceiling, or the neighbouring door, and the motion detection zones then trigger on nothing useful. Adding a wedge between the wall and the doorbell’s own mounting plate re-aims the whole unit without touching the wiring or moving the chime.
We pulled together the ten doorbell mounting wedges worth your attention in 2026, weighted heavily toward the things buyers actually complain about: does it fit my exact model, does it sit flat on lap siding, does it hold its angle after a winter, and does it cover the old screw holes. Each entry below lists the tilt in degrees, the compatibility list, and where the product breaks down.
Table of Contents
Top 3 Best Doorbell Mounting Wedges for Angled Porches (October 2026)
Blink Video Doorbell Wedge Mount
- Vertical tilt up or down
- First generation Blink only
- Reuses existing screw holes
NANW Adjustable 30-55 Degree Mount
- Adjustable 30 to 55 degrees
- IP54 water resistance
- Full hardware pack
RIOVO Adjustable 30-55 Degree Mount
- Printed degree scale
- Works with Ring Blink and Nest
- Symmetrical design
Best Doorbell Mounting Wedges at a Glance in 2026
| Product | Specifications | Action |
|---|---|---|
| Blink Video Doorbell Wedge Mount (1st generation) – Black |
|
Check Latest Price |
 Anti-Theft Video Doorbell Mount, Adjustable 360 Degree, No-Drill |
|
Check Latest Price |
| NANW Adjustable 30 to 55 Degree Video Doorbell Angle Mount Bracket |
|
Check Latest Price |
 Doorbell Bracket Mount for Ring Video Doorbell Pro, 20/30/40 Degree Wedge Kit |
|
Check Latest Price |
| RIOVO Adjustable 30 to 55 Degree Doorbell Angle Mount |
|
Check Latest Price |
 Nest Hello Wall Plate with 30 Degree Angled Wedge Mount |
|
Check Latest Price |
 S7 Adjustable 30 to 55 Degree Doorbell Angle Mount |
|
Check Latest Price |
 Vinyl Siding Angle Adjustment Doorbell Mount for Ring Video Doorbell |
|
Check Latest Price |
 Wasserstein Horizontal Adjustable Angle Mount and Wall Plate 35 to 55 Degrees |
|
Check Latest Price |
 360 Degree Adjustable Ring Doorbell Angle Mount for 2026 Battery Models |
|
Check Latest Price |
1. Blink Video Doorbell Wedge Mount (1st generation) for Flat Side-of-Door Mounts
Blink Video Doorbell Wedge Mount (1st generation) – Black
Vertical tilt up or down
1st gen Blink Video Doorbell only
Wedge plus four mounting screws
Pros
- Fast install with all hardware in the box
- Reuses the existing screw holes so there is no new drilling
- Blends in because it matches the doorbell body
- Useful beside a door on a flat wall
Cons
- Vertical tilt only with no sideways swing
- Doorbell rests on the wedge rather than snapping in
- Not heavy duty
- Wall screws not included
This is the official Blink accessory and it has the largest review base of anything in this roundup, which tells you how often the problem comes up. Installation took me under ten minutes because the standard doorbell screw spacing means the wedge lands straight onto the holes you already have.
The geometry is simple: the wedge tilts the doorbell vertically, up or down, and nothing else. On a porch where the doorbell sits on the narrow wall section beside the door, that vertical adjustment is exactly what you need to catch visitors as they turn the corner rather than straight ahead.
Where it falls short is structural. The doorbell rests on the wedge instead of clipping into it, so the fit is looser than a snap-in mount, and reviewers describe the plastic as not heavy duty. There is no lateral adjustment at all, so if your problem is aiming around a corner rather than tilting down, this is the wrong tool.
One more thing to plan for: the four screws in the box secure the wedge to the doorbell, but wall screws are not included. If you are mounting into brick or a hollow soffit, buy your own masonry anchors first.
Check the model generation before you buy
This wedge is listed for the first generation Blink Video Doorbell only. Later Blink models changed the backplate geometry, and buyers report that the fit is not interchangeable across generations.
If you have a newer Blink, read the compatibility line on the listing twice before ordering. A wedge that looks identical in a photo can still sit wrong against the backplate.
Why you might skip it
If your porch needs a big swing rather than a small vertical nudge, this wedge will not get you there. One reviewer summary puts it plainly: vertical-only adjustment and a loose sit-in fit are the two recurring complaints.
It is also not the answer if you are renting. There is no adhesive option here, so this is a screwed install every time.
2. NANW Adjustable 30 to 55 Degree Mount for Side-of-Door Porches
NANW Adjustable 30 to 55 Degree Video Doorbell Angle Mount Bracket
Adjustable 30 to 55 degrees
IP54 water resistance
Mount anchors screwdriver and manual
Pros
- 30 to 55 degree range suits side-of-door porches
- Angle holds once the set screws tighten
- Masonry anchors and screws included
- Wires stay enclosed with room for wire nuts
Cons
- No masonry drill bit included
- Rear gap on uneven walls can admit insects
- Newest 2nd Gen battery doorbells excluded
This is the wedge I would reach for on a townhouse or condo wall that sits perpendicular to the front door. Thirty degrees handles most of those installs, and the adjustment up to 55 degrees covers the awkward ones where the walkway runs at an angle to the entry.
It carries a 4.5 rating across more than two thousand reviews, and the praise is consistent: the angle holds once you tighten the set screws, and there is enough room behind the wedge for wire nuts on a wired install. Several owners report the setting surviving multiple seasons outdoors without creeping.
The hardware pack is unusually complete for this category. Mount, screws, wall anchors, a screwdriver, and a manual all ship in the box, so the only thing you may need to buy separately is a masonry bit if you are going into brick.
Watch the compatibility list carefully. It covers Video Doorbell 1 through 4, Wired, Pro, and Battery Doorbell Plus, but it explicitly excludes the newest 2nd Gen battery models. Reviewers also mention a rear gap on uneven walls that can let insects in behind the plate, so run a bead of exterior sealant if your siding is not flat.
Why the adjustability matters in practice
A fixed wedge forces you to guess before you drill. This one lets you mount, stand back, and change the setting in small increments until the frame covers the approach rather than the ceiling.
The 30 to 55 degree window is a sensible range because it starts just under a right angle’s worth of lean and stops short of the point where you start losing the tops of heads.
Where it will disappoint you
If your doorbell is one of the newest battery models, this wedge does not fit and no amount of adjusting will help. Verify the model number before you order.
On deeply uneven siding the plate can rock a little at the back edge. Buyers who had trouble usually solved it with sealant or a backing board rather than a different bracket.
3. RIOVO Adjustable 30 to 55 Degree Mount for Ring, Blink, and Nest
RIOVO Adjustable 30 to 55 Degree Doorbell Angle Mount Compatible with Video Doorbell Wired/Pro and Blink Video Doorbell, Replacement Angle Adjustment Adapter Mounting Bracket Wedge Kit
Adjustable 30 to 55 degrees
Printed degree scale
Ring Wired, Pro, Blink and Nest fit
Pros
- Printed degree scale makes the angle repeatable
- Symmetrical so it works on either side of the door
- Spans Ring Blink and Nest in one part
- Well-finished ABS with stainless steel screws
Cons
- Not compatible with Video Doorbell 3
- No wall plate so old holes need covering
The printed degree scale on this mount is a small detail that saves real time. Instead of guessing and re-tightening, you set the pointer to a number, which makes the install repeatable and gives you something to write down if you ever re-aim the doorbell.
It also crosses three brands in one part, which matters if you live in a building where different doors run different hardware. Buyers use it with Ring Wired, Video Doorbell Pro, Blink, and Google Nest units.
The bracket measures 2.54 by 1.95 by 0.47 inches and weighs just over three ounces, so it is compact enough for a narrow wall section without needing a backing board. The stainless steel screws are described as fitting the holes precisely, which matters on small mounts where slop shows up as wobble.
Two limits are worth knowing. It does not fit the Video Doorbell 3, and there is no wall plate included, so if you are covering the original doorbell holes you will want to patch or cover those separately.
Best when you own more than one brand
The cross-brand compatibility is the reason to pick this over a similar adjustable wedge. Keep one in the toolbox and it covers most of the wired and battery units you are likely to encounter, apart from the Video Doorbell 3.
Reviewers consistently credit the scale with cutting down on trial and error, and the symmetric shape means the same part works whether your door hinges swing in or out.
What you give up
There is no hole-covering plate, which is the one feature you will miss on a retrofit where the old chime button left two visible screw holes.
The Video Doorbell 3 exclusion catches people out regularly because it sits in the middle of the otherwise broad Ring range. Confirm your exact generation first.
4. sibada Vinyl Siding Angle Adjustment Mount for Slanted Siding
Vinyl Siding Angle Adjustment Doorbell Mount for Ring Video Doorbell
Built for 4 inch standard vinyl siding
Flush mount for slanted siding
2.6 x 0.86 x 5.2 inches
Pros
- Highest average rating in this group at 4.6
- Sits the doorbell flush so the camera faces forward rather than down
- Holes align with Ring patterns
- Also fits non-Ring units such as Aqara
Cons
- 4 inch vinyl only with no 5 inch version
- Wires may need a drilled side hole
- Longer screws often needed for sheathing
This one is not a wedge in the usual sense. It is a spacer designed around the reveal of 4 inch standard vinyl lap siding, and it levels the doorbell so the lens faces forward instead of pointing at the bottom lap.
That design goal is exactly the angled-porch problem. On lap siding, a flat-mounted camera tends to stare at the shadow line under each course, which is why so many people report a doorbell that sees only siding.
At 4.6 it holds the highest average rating of anything we reviewed, and the reason shows in the feedback: owners like the flush fit and the finished look it gives compared with a chunky wedge hanging off the wall.
It fits Video Doorbell 1 through 4, the 2020 release, Wired, Pro, Pro 2, and Blink units, with hole patterns that line up with the standard Ring mounting positions. It weighs 0.05 kg, so it adds almost nothing to the load on your siding.
Measure your siding before anything else
This mount is built for 4 inch standard vinyl only, not Dutch lap, and there is no 5 inch version. That single measurement decides whether this is the right part.
Take a tape to the wall and measure the visible face of a siding course. If it reads four inches and the profile is a simple lap, you are in the target case.
Where it gets awkward
On a wired install the wires may need a small drilled side hole to reach around the spacer, and buyers report that longer screws are often required to bite into the sheathing behind vinyl.
If your wall is Dutch lap, cedar, or fiber cement, skip this one and use a general adjustable wedge instead.
5. Wasserstein Horizontal Adjustable Mount for Re-Aiming a Wired Ring
Wasserstein Horizontal Adjustable Angle Mount & Wall Plate (35° to 55°) – Compatible with Ring Video Doorbell (Wired)
35 to 55 degree horizontal adjustment
Sliding wall plate covers old holes
Weatherproof metal construction
Pros
- Metal build feels sturdier than the plastic alternatives
- Sliding plate hides the original doorbell holes
- Smooth 35 to 55 degree aim toward the walkway
- Toolkit included in the box
Cons
- Hole pattern is not standard so extra drilling is often needed
- Very small screws
- Ring Video Doorbell Wired only
This is the only mount here that moves horizontally rather than vertically, and that is exactly what a side-wall install needs. When the door is on one wall and the walkway runs along a perpendicular wall, the problem is lateral aim, not downward tilt.
Adjustment runs from 35 to 55 degrees with a default of 35, so you can start conservative and swing further only if the first setting does not cover the path. The sliding wall plate extends to cover the previous screw holes, which keeps an older install looking intentional.
The metal construction is the other differentiator. In a category built from ABS, a metal plate feels more rigid, and reviewers single that out as the reason it does not flex when the doorbell is swivelled.
Compatibility is narrow: this is for the Ring Video Doorbell Wired. If your unit is battery powered, this mount is not for you regardless of how well it works otherwise.
Reach for this when the door and the walkway are on different walls
Most wedges tilt down. This one swings side to side, so it solves the case where your doorbell is aimed at a blank neighbouring wall and you need it pointed along the path to the door.
For a 90 degree side-wall install, this is closer to what you need than anything else in the roundup.
Plan for extra drilling
The screw pattern is not standard, so you should expect to drill new holes rather than reuse the old ones. That is why the sliding plate matters; it is covering holes you could not use.
The included screws are also described as very small, so on masonry you will want to bring your own fasteners.
6. Anti-Theft 360 Degree No-Drill Mount for Apartment and Rental Installs
Anti-Theft Video Doorbell Mount，Adjustable 360° Doorbell Angle No-Drill
0 to 360 degree rotation
ABS plastic
3.45 x 3 x 6.1 inches
Pros
- Full rotation covers the whole approach path
- Adhesive or screw mounting so it suits rented units
- Anti-theft screw and screwdriver included in the box
- Compact enough for an apartment entry
Cons
- Adhesive needs smooth surfaces and will not hold on textured walls
- Not for Wyze Nest or Arlo units
- Ring support limited to the 2026 battery models
Free rotation from 0 to 360 degrees is the appeal here. Instead of choosing between vertical and horizontal, you set the aim once and it stays where you put it, which works well on an entry where the path curves around a corner immediately.
It measures 3.45 by 3 by 6.1 inches and weighs 0.18 kg, so it is small enough for a narrow wall without needing a backing board. The box includes the mount, instructions, accessories, and an anti-theft security screw with its own screwdriver.
Two mounting routes are supported: 3M adhesive for a no-drill install, or screws into the wall. The anti-theft screw locks the doorbell into the mount and loosens only with the included tool, which matters if the unit is reachable from a walkway.
The compatibility line is specific and worth reading twice. It covers the 2026 battery Doorbell plus the Plus and Pro models, and it explicitly excludes Ring units from before 2025, along with Wyze, Nest, and Arlo.
A good fit for renters and shared entries
The adhesive route is what makes this usable in a rental or a condo entry you are not permitted to drill. It comes down in one piece when you move out.
Buyers also like the anti-theft hardware, since a wall-mounted doorbell on an apartment corridor is an easy target.
Know where adhesive will not hold
The surface has to be smooth. On textured stucco, brick, or a rough-finish wall the adhesive has nothing to grip, and reviewers consistently tell people to use screws instead in those cases.
Because the fit list excludes Wyze, Nest, and Arlo, owners of those brands should not buy on the strength of the rotation range alone.
7. HOLACA 20/30/40 Degree Fixed Plates for Ring Video Doorbell Pro
Doorbell Bracket Mount for Ring Video Doorbell Pro, Angle(20/30/40 Degree) Adjustment Adapter Mounting Plate Bracket Wedge Kit
Three fixed angles for Ring Pro
20 and 30 degree plates can combine
PC plastic with spare screws
Pros
- Three angle plates let you dial in the tilt without a single product choice per angle
- Spare hardware included
- Installs in 10-15 minutes
Cons
- Video Doorbell Pro only with no fit for other generations
- Fixed angles with no continuous adjustment
- About 10 percent of ratings sit at one star
The idea here is simple: instead of one wedge, you get a 20 degree, a 30 degree, and a 40 degree plate in the same package. Pro owners like having several fixed angles on hand so they can swap rather than return.
Because the angles are fixed, each plate is rigid once screwed down. There is nothing to creep or loosen, which some buyers prefer over a pivot joint that can drift over a winter.
The 20 and 30 degree plates can also be combined, so you can reach an angle beyond what either plate gives alone. Spare screws are included, which matters on a mount you expect to remove and refit.
Warranty coverage is six months and the material is PC plastic. Buyers report a 10 to 15 minute install, which tracks with there being no adjustment to calibrate.
A sensible pick if you own the Pro and nothing else
If you have a Ring Video Doorbell Pro and your porch needs a modest vertical nudge, having three angles in the box is genuinely useful. You will find the right one without buying twice.
For a homeowner who will live with this for years, fixed plates are the simpler mechanism to trust.
Check the model, because this one is exclusive
Compatibility is limited to the Video Doorbell Pro. It does not fit Gen 1, Gen 2, or the Pro 2, and that exclusivity is the drawback reviewers name most often.
The 4.2 rating with roughly a tenth of feedback at one star reflects that split: people with the right model are happy, and people who assumed it was universal are not.
8. Nest Hello Wall Plate with 30 Degree Wedge
Nest Hello Wall Plate with 30 Degree Left/Right Angled Wedge Mount For Nest Door Bell, Black
30 degree wedge for Nest Hello
Wall plate plus angled mount and screws
Military grade polymer
Pros
- Wall plate covers the old doorbell holes for a clean look
- Larger base surface helps on rough siding
- Stacks with the Nest 15 degree wedge for 45 degrees
- Sturdy polymer with a quick install
Cons
- Screw holes may not match your existing holes
- Textured face is awkward for some third-party cameras
- Fixed at 30 degrees with no adjustment
Google’s own Hello doorbell comes with a shallow 15 degree wedge that many owners find inadequate on a recessed or side entry. This plate gives you a full 30 degrees and, crucially, stacks with the factory wedge to reach 45 degrees.
The wall plate is the part that earns its keep on a retrofit. It covers the previous doorbell holes and marks, and its larger surface area gives you something solid to screw into when the wall is not perfectly flat.
Reviewers report two concrete wins from this plate: it removed night-vision glare caused by an adjacent brick surface, and it cut down false alerts on a 90 degree side-wall install. Both are the kind of result you get from changing the aim, not from adjusting motion zones in an app.
Breakage is covered for one year and the material is described as military grade polymer, which is thin marketing language for a rigid plastic plate, but it is holding up in the reviews.
Why the stacking option matters
Fixed wedges look limiting until you remember they combine. A 30 degree plate plus the 15 degree wedge already in your box equals 45 degrees, which covers a lot of awkward recessed entries without another part.
If you are on the official Nest wedge and just need more, this is a clean step up rather than a full replacement.
Mismatched screw spacing is the catch
The recurring complaint is that the holes may not line up with what is already in your wall, so you may be patching old holes or drilling new ones, which partly defeats the purpose of the cover plate.
The textured front face also sits awkwardly with some third-party cameras, and the angle is fixed at 30 with no way to fine-tune.
9. Yaluyo 360 Degree Mount with Rain Cover for 2026 Ring Battery Models
360° Adjustable Ring Doorbell Angle Mount for 2026 Newest Battery Doorbell/Plus/Pro (2nd Gen), No-Drill Adhesive Corner Wedge Kit with Rain Cover, Anti-Theft Video Doorbell Kits for Houses Apartments
0 to 360 degree rotation
Anti-theft screw with battery access
3.9 x 2 x 5.9 inches
Pros
- Covers the newest Ring battery doorbell models with full 360 degree aim
- Rain cover slows housing aging
- Anti-theft screw that still allows battery access
- No-drill adhesive option for renters
Cons
- Adhesive fails in heat and rain within days
- No support for Ring wired or pre-2025 models
- Screws can be undersized for masonry
If you run the newest Ring battery doorbell, this is one of the few mounts on the market that actually fits it. Free 0 to 360 degree rotation covers a corner install, a side wall, and a slanted siding situation with one part.
The box is the most complete in the roundup: a 360 mount, a rain cover, a backplate, 3M adhesive, a screw kit, and a guide. The rain and sun cover is a sensible addition for a unit mounted on an exterior corner where the housing takes the full weather load.
The anti-theft screw locks the doorbell in place and loosens only far enough to reach the batteries, so you are not removing the whole mount for every charge. That is a real convenience on a battery unit.
At 3.9 by 2 by 5.9 inches and 5.9 ounces, it is compact and light. Mounting is either the included adhesive or the permanent screw kit.
Mechanically the most capable mount here
Full rotation on a supported model solves more porch geometries than any fixed or semi-adjustable wedge. If your angle problem is not one of the tidy 30 to 55 degree cases, this handles it.
Owners of supported models rate the build quality and the rain cover positively, and it is the newest-generation option in the category.
Install it with screws, not tape
This is the lowest rated product in the roundup at 4.1, and the reason is consistent: several reports of the adhesive peeling away in summer heat within days. On a south-facing wall, expect the tape route to fail.
Compatibility is also limited to the 2026 battery Doorbell, Plus, and Pro 2nd Gen. Wired units and anything from before 2025 are out of scope, and the included screws can be undersized if you are going into masonry.
10. S7 Adjustable 30 to 55 Degree Mount for Straightforward Tilt
S7 Adjustable 30 to 55 Degree Doorbell Angle Mount
Adjustable 30 to 55 degrees
Accurate degree scale
5 x 1 x 2 inches ABS mount
Pros
- Graduated scale gives a repeatable angle
- Symmetric so it suits either side of the door
- Tightly fitting screw holes
- Ranked strongly in surveillance mounting hardware
Cons
- Can leave a gap on uneven surfaces
- Black finish only
- Small screws are easy to lose
This is a plain adjustable wedge with nothing exotic, which is sometimes exactly what a porch needs. The degree scale is accurate, the design is symmetric, and the whole mount measures 5 by 1 by 2 inches at 4.2 ounces.
It ranks well inside the surveillance housing and mounting bracket category, which tells you it is a real piece of mounting hardware rather than an unbranded filler. The included stainless steel screws fit the holes tightly, so the doorbell does not rattle in the mount.
Owners credit the graduated scale with making the angle repeatable and the symmetry with letting the same part work whether your door swings in or out. Those are modest features, but they are the ones you touch during install.
It is manufactured by win-win and carries the model number RINGMOUNT001, which is useful when you are ordering replacement hardware later.
A good default when you want adjustability and nothing else
If you have a standard 30 to 55 degree problem, this does that job cleanly with no learning curve. Set the scale, tighten, and check the view from your phone.
It is a sensible fallback when you cannot confirm a brand-specific fit and want a general adjustable part.
Limitations worth knowing
On an uneven surface the mount can leave a gap at the wall, which is worth sealing. The black-only finish limits it if your doorbell is white, and the small screws are easy to lose mid-install.
Because it is a straightforward wedge, it does not solve horizontal re-aim or corner installs the way a swivel mount does.
Which Tilt Degree Does Your Porch Actually Need?
Start by identifying the direction your doorbell needs to move. A camera aimed at a blank wall needs horizontal swing. A camera aimed at the sky or the porch ceiling needs downward vertical tilt. A camera pointed at the underside of a siding lap needs a spacer that levels it forward.
Then match the direction to the degree. Fifteen to thirty degrees covers most side-of-door installs. Thirty to 55 degrees covers porches where the entry is recessed or the walkway turns away from the wall. Thirty-five to 55 degrees horizontally covers a wall perpendicular to the door. Full 0 to 360 degree rotation covers corner installs and anything you have not fully measured yet.
Stacking works because the angles add. Two 15 degree wedges give roughly 30 degrees. The Nest Hello plate in this roundup is a 30 degree wedge designed to sit on top of the 15 degree wedge already in the box, giving 45 degrees. This is a known approach in the doorbell forums, and it is the cheapest way to get a steeper tilt if you already own a shallow wedge.
Over-tilting is the most common mistake. Push the camera down far enough and you lose the top of a visitor’s head, which defeats the point of having facial detail. If the frame cuts off at the forehead, back the angle off by five or ten degrees.
Match the Wedge to Your Siding Profile
Lap vinyl is the most common case and the one most products assume. Standard 4 inch exposure is what nearly every universal wedge is designed around, and a purpose-built spacer is the right choice when the camera is staring into the reveal.
Dutch lap and other overlapping profiles create a deeper pocket, so the doorbell body sits further out from the wall and the stock angle changes. A wedge with a longer backplate spans the reveal better than a small plate.
Cedar and other wood siding can move as it seasons, which means a plate held tightly by two screws can loosen. Seat screws in solid framing rather than in the siding board alone, and check the fit again after the first winter.
Fiber cement, stucco, and brick are masonry surfaces. They take screws well but need anchors, and a masonry bit is not included with any of the products here. Stucco is also textured, which rules out adhesive-only installs.
A flat wall beside the door needs the least. Many of these mounts exist for exactly that situation, where a small vertical tilt catches visitors as they turn onto the step.
Installation Basics: Test the Angle, Then Screw It Down
Before drilling, hold the wedge and doorbell against the wall in your hand and have someone look at the live view on your phone. That ten seconds of test-fitting eliminates most of the rework people describe in the forums.
If you cannot hold it, use a cardboard cut to the wedge profile and tape it in place. Painter’s tape on the wall marks your intended angle so you can check sightlines from the walkway before anything is drilled.
On vinyl siding, drive screws into the sheathing behind rather than into the siding board itself, and expect to use longer screws than the ones supplied if you are going through the full thickness. Some spacers also need a small drilled hole at the side to route the wires around the mount.
Seal the top edge of the wedge with exterior-grade sealant so water does not sit behind the plate. Several buyers mention insects getting into the rear gap on uneven walls, and sealant closes that path.
Finally, mount and then aim. Turn on the live view, walk up your own walkway, and adjust the angle until you can see faces from the moment someone clears the gate.
Common Mistakes That Ruin a Wedge Install
Over-tilting downward is the first one. You gain floor coverage and lose heads, and most people only notice when a delivery notification shows a cropped face.
Over-tilting sideways on a shared platform is the social version of the same error. On a townhome or condo wall, a steep sideways angle can put a neighbour’s door in frame, which turns a technical fix into a dispute.
Blocking the chime wiring is the third. Wedges with a tight back channel do not leave room for wire nuts, so check that your wires fit inside the channel before you commit.
Rocking plates on lap siding is the fourth. If the wedge rocks, the fix is a longer screw into the sheathing or a small backing board, not more tightening on the wedge itself.
Buying the wrong generation is the fifth and the most common. Three products in this roundup exclude specific models explicitly, and model names change often enough that a recommendation written a couple of years back may no longer fit what is on your wall.
Frequently Asked Questions
Is there a 45 degree mount for Ring doorbell cameras?
There is, though it depends on the model. Fixed stacks are the simplest route: a 30 degree wedge on top of a 15 degree wedge gives about 45 degrees, and the Nest Hello wall plate in our roundup is designed to combine exactly that way with Google’s factory wedge. For Ring Pro owners, adjustable mounts in the 30 to 55 degree range cover a 45 degree setting without stacking. Note that most of these mounts are model-specific, so check the compatibility list before ordering.
Can I install a Ring doorbell on angled siding?
Yes. On lap or slanted siding the fix is usually a spacer that levels the doorbell so the camera faces forward rather than down into the reveal, or a wedge that adds a controlled tilt. Measure your siding exposure first: standard 4 inch vinyl is what most mounts assume, and Dutch lap needs a deeper backplate. Seal the top edge of the mount so water does not collect behind it.
Can you mount a Ring doorbell on vinyl siding?
You can, but drill into the sheathing behind the siding rather than the siding board itself, and use screws long enough to bite past the full thickness of the vinyl. Most universal wedges are designed around 4 inch standard lap exposure. If you want a no-drill approach, adhesive mounts exist for smooth walls, though they will not hold on textured surfaces and can fail in summer heat.
What height should I mount my video doorbell?
Aim high enough that you capture a face before the visitor is at the door, which usually means between about 40 and 48 inches from the ground. Mounting too low means you get the tops of heads. Mounting too high pushes the camera downward, which is when people reach for a wedge. If your camera keeps catching only the porch ceiling, raise it and add a small downward tilt rather than a large one.
Where not to put a Ring doorbell?
Avoid a spot where the camera points mainly at a blank wall, at the neighbouring door on a shared platform, or where a steep angle crops the tops of heads. Also avoid mounting where the view is blocked by a porch post, a light fixture, or a wall corner within a few inches. On rental property, check whether drilling is permitted before you start, and choose a location where you can reach the existing screw holes.
Can you stack two doorbell wedges to get more tilt?
Yes, and it is a well-known approach in the doorbell forums. Because the angles add, two 15 degree wedges give roughly 30 degrees of tilt. Some wedges are designed for it, such as wall plates that sit directly on top of a factory wedge. Check that the stack is rigid and that the back channel still has room for your wires, since combined plates can be tight.
The Bottom Line on Doorbell Mounting Wedges in 2026
The Blink Video Doorbell Wedge Mount takes our Editor’s Choice because it is the simplest fix for the most common problem, it reuses the holes you already have, and it carries the largest review base in the category. For a side-of-door porch that needs more than a small nudge, the NANW adjustable 30 to 55 degree mount is the better buy, and the RIOVO mount is the pick if you want one part that covers Ring, Blink, and Nest.
Whichever doorbell mounting wedge you choose, the deciding factor is compatibility. Confirm your exact model generation, measure your siding exposure, and hold the whole assembly against the wall before you drill. Ten seconds of test-fitting will save you a return.